Description

With our in-house powder coating facility, all legs and frames can be finished in wide variety of colours to the highest standard.

• Table legs are made from highest quality 76.2×38.1 mm (3′ x 1 1/2′) aluminium box section.
• The support frames, made from 38.1×25.4 mm (1 1/2′ x 1′) aluminium box section, have been added to prevent any wobble and stop warping under load.
• Aluminium box section has 3.2mm thick walls.
• Designed for wooden, concrete or stone table tops up to 3.8m long.
• The top section of the frames will arrive with pre-drilled slotted plates for fixing into a wooden table top.
• Please let us know if your table top is the same size as the frame and we will remove fixing tabs from the outside faces of the legs.
• Can be made without slotted tabs to suit stone table tops. To ensure maximum stability, the stone top will need to be bonded to the frame.
• Standard table frame height is 720mm, but can be adjusted under request.
• Table frame will arrive in three sections – 2x L shaped parts (outside legs with top support frames) and 1x middle leg.
• The L shaped sections bolt together through middle leg.
• Suitable amount of rust resistant stainless steel fittings and bolts supplied with the frame.
• The bottom of the legs are finished with plastic caps.
• Frame finished in architectural grade powder coating, that offers a tough and hard wearing finish.
• Aluminium frame can be powder coated in any non-standard colour from the RAL chart – interpon.com
• For more information on our standard finishes please click here.
• Aluminium is by nature fine to leave out against the elements, it will not rust.
• Perfect for outdoor use.
• Handmade by experienced fabricators.
• Handmade in Devon, England.
• Matching bench, coffee table legs and frames available.

Bespoke options, including frame size, box section size, colour etc. available on request.